| Chlorine Tester (FCL=Free Chlorine; TCL=Total Chlorine) |
|
AMT25 (FCL+TCL): Meter + FCL DPD-1/100 Strip (100pcs) + TCL DPD-4/100 Strip (100pcs) AMT25F (FCL): Meter + FCL DPD-1/100 Strip (100pcs) |
|
||
| Features: 1. Microprocessor based for fast and accurate measurements. 2. EPA approved DPD method. 3. Large LCD 24 x 28 mm display for reading convenient. 4. Low battery alarm and auto shut off after 10 minutes of non use. |
|||
| Specifications: 1. Range: 0~3.50ppm 2. Resolution: 0.01ppm 3. Accuracy: ±3% 4. Sample: 5ml 5. Operating: 0~50°C, <85% RH 6. Power: 4 x AAA battery 7. Size: 42 x 33 x 125mm 8. Weight: 120g |
| pH ORP Chlorine Tester (FCL=Free Chlorine; TCL=Total Chlorine) |
| Features: 1. Microprocessor based for fast and accurate measurements. 2. EPA approved DPD method. 3. 4 in 1 can test Free Chlorine, Total Chlorine, pH, ORP. 3. Large LCD 24 x 28 mm display for reading convenient. 4. Low battery alarm and auto shut off after 10 minutes of non use. |
|||
| Specifications: 1. Range: FCL/TCL: 0~3.50ppm; pH:-2.00~16.00; ORP:-1999~ +1999mv (ORP probe optional) 2. Resolution: 0.01ppm; 0.01pH; 1mv 3. Accuracy: ±3%; ±0.02ph, ±2mv 4. Sample: 5ml 5. Operating: 0~50°C, <85% RH 6. Power: 4 x AAA battery 7. Size: 42 x 33 x 183mm 8. Weight: 150g |
| Chlorine Tester AMT22 (FCL=Free Chlorine; TCL=Total Chlorine) |
| Features: 1. Microprocessor based for fast and accurate measurements. 2. EPA approved DPD method. 3. Large LCD 45 x 25 mm display for reading convenient. 4. Memory function stores and recalls up to 150 points. 5. Low battery alarm and auto shut off after 10 minutes of non use. |
|
| Specifications: 1. Range: 0~5.00ppm (FCL & TCL) 2. Resolution: 0.01ppm 3. Accuracy: ±3% 4. Response time: <5s 5. Operating: 0~50C, <85% RH 6. Sample: 10ml 7. Data memory: 150 points 8. Power: 4 x AAA battery 9. Size: 70 x 135 x 65mm 10. Weight: 168g |
| FREE CHLORINE TESTER MW10 |
| The revolutionary new range handy FCL photometers are compact and easy to use, have a modern design, and measure Free Chlorine. Their main advantages are the small size, and the real simplicity when doing measurements on the spot. Within a few minutes you can get the required result on the LCD and the instrument directly displays the concentration of the specific component in ppm. The meter automatically turns off after 2 minutes in order to save the battery.
When specific reagents are added, the water sample takes on a degree of coloration that is proportional to the concentration of the parameter being measured. The photometer measures this coloration. When a light beam passes through the coloured sample, energy with a specific wavelength is absorbed by the test substance. The photometer determines the coloration of the sample by measuring the transmission or absorption of light of this wavelength. The photometer then uses a microprocessor to calculate the concentration and displays the result. The field of application is really wide including agriculture, drinking water analyses, aquariums, swimming pools or fish farms. As a result of this versatility and the affordable price it is undoubtedly worth using these products. |
|
| SPECIFICATIONS Range: 0.00 to 2.50 ppm Resolution: 0.01 ppm Accuracy: ±0.03 ppm ±3% of reading @ 25 °C Typical EMC Dev.: ±0.01 ppm Light Source: Light Emitting Diode @ 525 nm Light Detector: Silicon Photocell Method: Adaptation of USEPA method 330.5. The reaction between free chlorine and the DPD reagent causes a pink tint in the sample. Environment: 0 to 50°C (32 to 122 °F); max. 95% RH non-condensing Battery Type: 1 x 1.5V AAA Auto-shut off: After 2 minutes of non-use. Dimensions: 81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”) Weight: 64 g (2.25 oz.) |
| Swimming Pool SPA pH & Chlorine Water Tester KCP01 |
| Specifications: Powered by: AA 1.5V battery Tough plastic body Ideal pH for pool: 7.2-7.8 Ideal Chlorine for pool: 1.2-1.7ppm Size: 142 x 90 x 30mm Benefits: Spend less time testing and more time swimming Save money on having to purchase new chemicals Easy to handle and simple to store |
| Multi Parameter Water Quality Analyzer |
| Introduction: Multi parameter water quality analyzer adopts Photoelectric detection than color principle to replace traditional optical colorimetric; to eliminate personal error. So testing resolution is high. When testing, put special testing liquid into the water sample, water will change color. Then put the sample water on the photo electricity comparator block, the analyzer will determine iron density according to water color. It is widely used in large, middle and small size water plant and industry or domestic water, to test iron density, in order to control water quality to meet standard requirement. Characters: 1. Micro computer control, key touch board. LCD digital display back light. Use latest micro process technology and high stable integrated circuit. 2. Data linear processor and data smoothing function. Quickly auto points correction. 3. Curve calibration function. Directly read accurate testing figure. 4. Long lifetime for light source. Free maintenance. Guarantee could work for long time. 5. Patent right protection. Advanced technology. Could meet GB/T5750-2006 life drink water healthy standard. Specifications 1. test water quality for kinds of irons. 2. 0.001 resolution 3. LCD display result |
| Model | TL9022 | TL9025 | TL9029 |
| Measuring Range (mg/L) | Residual Cl: 0~2.5 ClO2: 0~2.0 |
Residual Cl: 0~2.5 Total Cl: 0~5.0 Combined residual: 0~2.5 ClO2: 0~2.0 NaNO2: 0~0.3 |
Residual Cl: 0~2.5 Total Cl: 0~5.0 Combined residual: 0~2.5 ClO2: 0~2.0 NaNO2: 0~0.3 Dissolved O2: 0~12; Ammonia : 0~10 Fe: 0~0.8 Cu: 0~2.0 |
| Minimum Readout | 0.001mg/L | ||
| Basic Error (F.S) | ±5% FS+1 bit | ||
| Repeatability | 2% | ||
| Power Supply | AC 220V/ 50Hz/15W | ||
| characters | Table type, micro key touch board; LCD display; several points curve calibration. | ||
| Multi Function Water Test Kits |
| Features: 1. Colorimeter for water test, fast and accuracy 2. Suit for fresh water and sea water 3. Battery operated and can use outside 4. Max 2000 test record 5. USB port to download data to PC 6. Stability: RSD <0.5% 7. Wave Length: 390~680nm 8. Alarm function 9. Weight: 240g 10. Size: 120 x 130 x 45mm 11. Aluminium carrying case |
|
| Tested Parameter | OCT-W1 | OCT-W2 | OCT-X2 | OCT-B |
| Ammonia NH3 -N | 0.04 ~ 8.0 mg/L | 0.04 ~ 8.0 mg/L | 0.01 ~ 20.0 mg/L | 0.01 ~ 20.0 mg/L |
| Nitrite (N) | 0.002 ~ 0.4 mg/L | 0.002 ~ 0.4 mg/L | 0.002 ~ 0.8 mg/L | 0.002 ~ 0.8 mg/L |
| pH | 4.0 ~ 10.2 | 4.0 ~ 10.2 | 4.0 ~ 10.0 | 4.0 ~ 10.0 |
| DO | 0.5 ~ 20 mg/L | 0.5 ~ 20 mg/L | 0.5 ~ 20 mg/L | 0.5 ~ 20 mg/L |
| FCL (Cl2) | 0.02 ~ 1 mg/L | 0.02 ~ 1 mg/L | 0.01 ~ 3 mg/L | 0.01 ~ 3 mg/L |
| Sulfide S2- | 0.004 ~ 0.35 mg/L | 0.004 ~ 0.35 mg/L | 0.001 ~ 1.35mg/L | 0.001 ~ 1.35mg/L |
| Phosphate PO4 3- | 0.02 ~ 1.2 mg/L | 0.02 ~ 1.2 mg/L | 0.02 ~ 10 mg/L | 0.02 ~ 10 mg/L |
| Copper (Cu) | 0.001 ~ 3.0 mg/L | 0.001 ~ 3.0 mg/L | 0.001 ~ 5.0 mg/L | 0.001 ~ 5.0 mg/L |
| Total iron (Fe) | ————- | 0.01 ~ 5 mg/L | 0.02 ~ 10 mg/L | 0.02 ~ 10 mg/L |
| Total Alkalinity (CaCO3) | ————- | 70 ~ 700 mg/L | 25 ~ 500 mg/L | 25 ~ 500 mg/L |
| Total Hardness (CaCO3) | ————- | 10 ~ 620 mg/L | 10 ~ 500 mg/L | 10 ~ 500 mg/L |
| Chromium Cr 6+ | ————- | 0.01 ~ 1.0 mg/L | 0.01 ~ 5 mg/L | 0.01 ~ 5 mg/L |
| TCL (Cl-) | ————- | ————- | 0 ~ 400 mg/L | ————- |
| Turbidity | ————- | ————- | 2 ~ 400 NTU | 2 ~ 400 NTU |
| Sulfate Radical SO4 2- | ————- | ————- | 0 ~ 400 mg/L | ————- |
| Total Phosphorus | ————- | ————- | ————- | 0.02-5.0 mg/L |
| Permanganate Index | ————- | ————- | ————- | 0.1-20.0 mg/L |
| COD-LR | ————- | ————- | ————- | 10-120 mg/L |
| COD-HR | ————- | ————- | ————- | 100-1000 mg/L |
| Note: Can supply as required. | ||||
Be the first to review “FREE AND TOTAL CHLORINE TESTER”
Related products
Laboratory Instrumentation
Hplc Vials
Safety Kits
Uncategorized
Laboratory Instrumentation
Thermometers and pH Meters
Reviews
There are no reviews yet.